Close

• Manufacturer:
  Vermeer
• Model:
  D1320X900
• Rig Size:
  200,000 lbs pullback and over

DRILL RACK
Length (Minimum Transport): 50.5' (15.4 m)
Width: 8.5' (2.6 m)
Height (Minimum Transport): 115' (3 5 m)
Weight: 101000 lbs (45812.8 kg)
Suspension: Triple axle with air ride suspension
Front Base Anchor Length: 20' (6.1 m)
Front Base Anchor Width: 6' (1.8 m)
Front Base Anchor Height: 24" (61 cm)
Front Flat Anchor Length: 9.5' (2.9 m)
Front Flat Anchor Width: 5 ' (1 .5 m)
Front Flat Anchor Height: 8" (20.3 cm)
Rear Base Anchor Length: 16' (4.9 m)
Rear Base Anchor Width: 7.8' (2.4 m)
Rear Base Anchor Height: 8" (20.3 cm)
Number of Rear Legs: 2
Drill Rack Angle: 8 degrees to 12 degrees

DRILLERS CABIN
Length: 10'(3.1 m)
Width: 8.5'(2.6 m)
Height: 9' (2.7 m)
Weight: 6000 lbs (2721.6 kg)
Heat and Air Conditioning: In-wall combination unit

POWER PACK
Length: 22.4' (6.8 m)
Width: 8' (2.4 m)
Height: 10.3' (3.1 m)
Weight: 38000 lbs (17236.5 kg)
Make and Model: (1) CAT C-27
Fuel Type: Diesel
Fuel Capacity: 500 gal (1892.7 L)
Hydraulic Tank Capacity: 720 gal (2725.5 L)
Maximum Engine RPM: 2000 rpm
Gross Horsepower: 800 hp (596.6 kw)
EPA Certification Family: Tier 2 (EU Stage II)

POWER PACK OPTION TWO
Length: 32.2' (9.8 m)
Width: 8' (2.4 m)
Height: 10.3' (3.1 m)
Weight: 57260 lbs (25972.7 kg)
Make and Model: (2) CAT C-18
Fuel Type: Diesel
Fuel Capacity: 1000 gal (3785.4 L)
Hydraulic Tank Capacity: 720 gal (2725.5 L)
Maximum Engine RPM: 2000 rpm
Gross Horsepower: 1200 hp (894.8 kw)
EPA Certification Family: Tier 3 (EU Stage II)

POWER PACK OPTION THREE
Length: 32.2' (9.8 m)
Width: 8' (2.4 m)
Height: 10.3' (3.1 m)
Weight: 57260 lbs (25972.7 kg)
Make and Model: (2) CAT C-27
Fuel Type: Diesel
Fuel Capacity: 1000 gal (3785.4 L)
Hydraulic Tank Capacity: 720 gal (2725.5 L)
Maximum Engine RPM: 2000 rpm
Gross Horsepower: 1600 hp (1193.1 kw)
EPA Certification Family: Tier 2 (EU Stage II)

OPERATIONAL
Maximum Spindle Torque: 102500 ft-lb (138971.6 Nm)
Maximum Spindle Torque (Low at Maximum Engine RPM): 102500 ft-lb (138971.6 Nm)
Thrust: 1360000 lbs (616885.7 kg)
Pullback: 1360000 lbs (616885.7 kg)
Maximum Spindle Speed at Maximum Engine RPM (with PS800): 36 rpm
Maximum Spindle Speed at Maximum Engine RPM (with PS1200/PS1600): 54 rpm
Maximum Carriage Speed at Maximum Engine RPM: 64 ft/min (19.5 m/min)
Number of Rotation Motors: 1
Number of Drive Motors: 6
Mud Swivel: 3" (7.6 cm)

LOWER BREAKOUT VISE
Breakout Force: 253000 ft-lb (343022.5 Nm)
Configuration: 3-jaw clamp, 8" (20.3 cm)
Weight: 3800 lbs (1723.7 kg)
Travel: 6'(1.8 m)
Inside Diameter: 9.8 " (24.9 cm)

UPPER BREAKOUT VISE
Clamp Force: 250000 ft-lb (338955 Nm)
Configuration: 2-jaw clamp
Inside Diameter: 10" (25.4 cm)

SAFETY
Remote Lockout: Yes
Strike Alert: Yes