Equipment Specifications Library
Basic Model Information
-
Manufacturer:Ditch Witch
-
Model:JT2020 Mach 1
-
Rig Size:10,001 - 20,000 lbs pullback
View Manufacturers View Models Back to Listing
Specifications
Additional Info
DIMENSION
OVERALL LENGTH: 203 IN
OVERALL WIDTH: 51.5 IN
OVERALL HEIGHT: 78 IN
RACK CAPACITY 400'
DRILLING UNIT OPERATING MASS: 10,800 LB
ENTRY ANGLE: 10 - 14 degrees
ANGLE OF APPROACH: 18 degrees
ANGLE OF DEPARTURE: 18 degrees
POWER PIPE
LENGTH, NOMINAL: 120 IN
DIAMETER: 2.06 IN
DIAMETER, TOOL JOINT END: 2.63 IN
BEND RADIUS, MINIMUM: 130 FT
WEIGHT (LINED: 67 LB
OPERATION
SPINDLE SPEED, MAXIMUM: 150 RPM
SPINDLE TORQUE, MAXIMUM: 2200 FT-LB
CARRIAGE THRUST TRAVEL SPEED: 140 FPM
CARRIAGE PULLBACK TRAVEL SPEED: 140 FPM
THRUST FORCE: 17,000 LB
PULLBACK FORCE: 20,000 LB
BORE DIAMETER: 4 IN
BACKREAM DIAMETER (SOIL DEPENDENT): variable
GROUND TRAVEL SPEED, MAXIMUM*
FORWARD: 3.0 MPH
REVERSE: 3.0 MPH
POWER
ENGINE: Cummins B3.3
FUEL: Diesel
COOLING MEDIUM: Liquid
INJECTION: Direct
ASPIRATION: Turbocharged
CYLINDERS: 4
DISPLACEMENT: 199 cubic inches
BORE: 3.74 IN
STROKE: 4.53 IN
MANUFACTURER’S GROSS POWER RATING: 83 HP
RATED SPEED: 2400 RPM
DRILLING FLUID SYSTEM (ON-BOARD)
DRILLING FLUID PRESSURE, MAXIMUM: 1500 PSI
DRILLING FLUID FLOW, MAXIMUM: 30 GPM
FLUID CAPACITIES
HYDRAULIC RESERVOIR: 17 GAL
FUEL TANK: 30 GAL
BATTERY
SAE RESERVE CAPACITY RATING: 195 minutes
SAE COLD CRANK RATING @ 0° F (-18° C): 950 amps
OVERALL LENGTH: 203 IN
OVERALL WIDTH: 51.5 IN
OVERALL HEIGHT: 78 IN
RACK CAPACITY 400'
DRILLING UNIT OPERATING MASS: 10,800 LB
ENTRY ANGLE: 10 - 14 degrees
ANGLE OF APPROACH: 18 degrees
ANGLE OF DEPARTURE: 18 degrees
POWER PIPE
LENGTH, NOMINAL: 120 IN
DIAMETER: 2.06 IN
DIAMETER, TOOL JOINT END: 2.63 IN
BEND RADIUS, MINIMUM: 130 FT
WEIGHT (LINED: 67 LB
OPERATION
SPINDLE SPEED, MAXIMUM: 150 RPM
SPINDLE TORQUE, MAXIMUM: 2200 FT-LB
CARRIAGE THRUST TRAVEL SPEED: 140 FPM
CARRIAGE PULLBACK TRAVEL SPEED: 140 FPM
THRUST FORCE: 17,000 LB
PULLBACK FORCE: 20,000 LB
BORE DIAMETER: 4 IN
BACKREAM DIAMETER (SOIL DEPENDENT): variable
GROUND TRAVEL SPEED, MAXIMUM*
FORWARD: 3.0 MPH
REVERSE: 3.0 MPH
POWER
ENGINE: Cummins B3.3
FUEL: Diesel
COOLING MEDIUM: Liquid
INJECTION: Direct
ASPIRATION: Turbocharged
CYLINDERS: 4
DISPLACEMENT: 199 cubic inches
BORE: 3.74 IN
STROKE: 4.53 IN
MANUFACTURER’S GROSS POWER RATING: 83 HP
RATED SPEED: 2400 RPM
DRILLING FLUID SYSTEM (ON-BOARD)
DRILLING FLUID PRESSURE, MAXIMUM: 1500 PSI
DRILLING FLUID FLOW, MAXIMUM: 30 GPM
FLUID CAPACITIES
HYDRAULIC RESERVOIR: 17 GAL
FUEL TANK: 30 GAL
BATTERY
SAE RESERVE CAPACITY RATING: 195 minutes
SAE COLD CRANK RATING @ 0° F (-18° C): 950 amps
This information is provided for informational purposes only. HDD Broker LLC cannot warrant the accuracy or completeness of this information. This information is subject to change by the manufacturer. Some specifications may vary by model year.