Diese Seite wurde mit Google Übersetzer übersetzt
Gerätespezifikationsbibliothek
Grundlegende Modellinformationen
-
Hersteller:Barbco
-
Modell:30/36-200
Hersteller anzeigen Modelle anzeigen
Spezifikationen
Zusätzliche Information
DIMENSIONS
Work Range: 4 to 30 - 36" (101.6 to 762 mm - 914.4 mm)
Centerline: 30" (762 mm) 19" (482.5 mm); 36" (914 mm) 22" (558.8 mm)
Height: 30" (762 mm) Mode - 48" (1219 mm); 36" (914 mm) Mode - 51" (1295.4 mm)
Width - Track: 50" (1270 mm)
Length: 144" (3.05 mm)
WEIGHTS
Base Unit: 2500 lbs (1134 kg)
Power Unit: 2400 lbs (1089 kg)
Casing Pusher: 30" 673 lbs (305 kg)
Casing Pusher: 36" 750 lbs (340 kg)
Master Track: 1175 lbs (533 kg)
Extension Track: 1050 lbs (476.3 kg)
ENGINE
Deutz F4L2011 Intercooled Diesel with Electric Start 65 HP @ 2800 RPM 140 ft/lbs (190 Nm) Peak Torque @ 1700 RPM
CLUTCH
10" (254 mm) Diameter
TRANSMISSION
T-18 - 4-Speed
1st Gear 6.32 : 1 Ratio
2nd Gear 3.09 : 1 Ratio
3rd Gear 1.69 : 1 Ratio
4th Gear 1.00 : 1 Ratio
Reverse 7.44 : 1 Ratio
MAXIMUM OUTPUT TORQUES AND SPEEDS
1st Gear 39,816 ft/lbs (53,990 Nm) @ 6 RPM
2nd Gear 19,467 ft/lbs (26,397 Nm) @ 12 RPM
3rd Gear 10,647 ft/lbs (14,437 Nm) @ 22 RPM
4th Gear 6,300 ft/lbs (8,543 Nm) @ 38 RPM
Reverse 46,872 ft/lbs (63,558 Nm) @ 5 RPM
GEAR BOX
Fairfield #10 45 : 1 Ratio
AUGER DRIVE:
3" (76.2 mm) Hex
FILTERS
Suction: 100 Mesh Washable Stainless Steel Wire Cloth
Return: 10 Micron Replaceable Element
PUMP
#15 Oil Gear 3500 PSI Continuous, 4000 PSI Intermittent Pressure Compensated Load Sensing System, 24.9 GPM @ 2800 RPM
CYLINDERS
(2) 6" (152.4 mm) Bore x 36" (914.4 mm) Stroke 197,918 lbs (880,339 N) Thrust (Continuous) 226,192 lbs (1,006,102 N)
OPTIONAL
Vandalism Shield
36" Push Kit
Intermittent
Work Range: 4 to 30 - 36" (101.6 to 762 mm - 914.4 mm)
Centerline: 30" (762 mm) 19" (482.5 mm); 36" (914 mm) 22" (558.8 mm)
Height: 30" (762 mm) Mode - 48" (1219 mm); 36" (914 mm) Mode - 51" (1295.4 mm)
Width - Track: 50" (1270 mm)
Length: 144" (3.05 mm)
WEIGHTS
Base Unit: 2500 lbs (1134 kg)
Power Unit: 2400 lbs (1089 kg)
Casing Pusher: 30" 673 lbs (305 kg)
Casing Pusher: 36" 750 lbs (340 kg)
Master Track: 1175 lbs (533 kg)
Extension Track: 1050 lbs (476.3 kg)
ENGINE
Deutz F4L2011 Intercooled Diesel with Electric Start 65 HP @ 2800 RPM 140 ft/lbs (190 Nm) Peak Torque @ 1700 RPM
CLUTCH
10" (254 mm) Diameter
TRANSMISSION
T-18 - 4-Speed
1st Gear 6.32 : 1 Ratio
2nd Gear 3.09 : 1 Ratio
3rd Gear 1.69 : 1 Ratio
4th Gear 1.00 : 1 Ratio
Reverse 7.44 : 1 Ratio
MAXIMUM OUTPUT TORQUES AND SPEEDS
1st Gear 39,816 ft/lbs (53,990 Nm) @ 6 RPM
2nd Gear 19,467 ft/lbs (26,397 Nm) @ 12 RPM
3rd Gear 10,647 ft/lbs (14,437 Nm) @ 22 RPM
4th Gear 6,300 ft/lbs (8,543 Nm) @ 38 RPM
Reverse 46,872 ft/lbs (63,558 Nm) @ 5 RPM
GEAR BOX
Fairfield #10 45 : 1 Ratio
AUGER DRIVE:
3" (76.2 mm) Hex
FILTERS
Suction: 100 Mesh Washable Stainless Steel Wire Cloth
Return: 10 Micron Replaceable Element
PUMP
#15 Oil Gear 3500 PSI Continuous, 4000 PSI Intermittent Pressure Compensated Load Sensing System, 24.9 GPM @ 2800 RPM
CYLINDERS
(2) 6" (152.4 mm) Bore x 36" (914.4 mm) Stroke 197,918 lbs (880,339 N) Thrust (Continuous) 226,192 lbs (1,006,102 N)
OPTIONAL
Vandalism Shield
36" Push Kit
Intermittent
Diese Information dient nur zu Informationszwecken. HDD Broker LLC kann die Richtigkeit oder Vollständigkeit dieser Informationen nicht garantieren. Diese Informationen können vom Hersteller geändert werden. Einige Spezifikationen können sich je nach Modelljahr unterscheiden.