Diese Seite wurde mit Google Übersetzer übersetzt
Gerätespezifikationsbibliothek
Grundlegende Modellinformationen
-
Hersteller:Ditch Witch
-
Modell:JT1720 Mach 1
-
Rig Größe:10,001 - 20,000 lbs pullback
Hersteller anzeigen Modelle anzeigen
Spezifikationen
Zusätzliche Information
DIMENSIONS
Length: 200 in
Height: 86 in
Width: 54 in
Operating weight: 12,000 lb
DRILL PIPE
Length: 118.1 in
Joint diameter: 2.5 in
Tubing diameter: 2.1 in
Min. bend radius: 130 ft
Weight (lined): 64 lb
OPERATIONAL
Spindle
Speed (max): 200 rpm
Torque (stall): 1800 ft-lb
Carriage speed: 130 fpm
Thrust: 17,000 lb
Pullback: 17,000 lb
Bore diameter: 3-5 in
Backream diameter: soil dependent
Ground drive speed
Forward: 0-2 mph
Reverse: 0-2 mph
POWER
Engine: John Deere model #4045D
Fuel: Diesel
Cooling medium: John Deere Cool Guard
50/50 pre-mixed coolant
Aspiration: Natural
Number of cylinders: 4
Displacement: 276 cubic inches
Bore: 4.19 in
Stroke: 5 in
Gross power @ 2500 rpm: 85 hp
Maximum governed speed (no load): 2500 rpm
Operating power @ 2500 rpm: 76 hp
FLUID CAPACITIES
Fuel tank: 33 gal
Hydraulic reservoir: 20 gal
Engine oil with filter: 9 qt
DRILLING FLUID SYSTEM (ON-BOARD)
Fluid pressure: 700 psi
Flow rate: 0-25 gpm
BATTERY
SAE reserve capacity 120 min.
SAE cold crank @ 0° F (-18° C) 800 amps
NOISE LEVEL
Operator < 91 dbA sound pressure per ISO 6394
Exterior < 109 dbA sound power per ISO 6393
Length: 200 in
Height: 86 in
Width: 54 in
Operating weight: 12,000 lb
DRILL PIPE
Length: 118.1 in
Joint diameter: 2.5 in
Tubing diameter: 2.1 in
Min. bend radius: 130 ft
Weight (lined): 64 lb
OPERATIONAL
Spindle
Speed (max): 200 rpm
Torque (stall): 1800 ft-lb
Carriage speed: 130 fpm
Thrust: 17,000 lb
Pullback: 17,000 lb
Bore diameter: 3-5 in
Backream diameter: soil dependent
Ground drive speed
Forward: 0-2 mph
Reverse: 0-2 mph
POWER
Engine: John Deere model #4045D
Fuel: Diesel
Cooling medium: John Deere Cool Guard
50/50 pre-mixed coolant
Aspiration: Natural
Number of cylinders: 4
Displacement: 276 cubic inches
Bore: 4.19 in
Stroke: 5 in
Gross power @ 2500 rpm: 85 hp
Maximum governed speed (no load): 2500 rpm
Operating power @ 2500 rpm: 76 hp
FLUID CAPACITIES
Fuel tank: 33 gal
Hydraulic reservoir: 20 gal
Engine oil with filter: 9 qt
DRILLING FLUID SYSTEM (ON-BOARD)
Fluid pressure: 700 psi
Flow rate: 0-25 gpm
BATTERY
SAE reserve capacity 120 min.
SAE cold crank @ 0° F (-18° C) 800 amps
NOISE LEVEL
Operator < 91 dbA sound pressure per ISO 6394
Exterior < 109 dbA sound power per ISO 6393
Diese Information dient nur zu Informationszwecken. HDD Broker LLC kann die Richtigkeit oder Vollständigkeit dieser Informationen nicht garantieren. Diese Informationen können vom Hersteller geändert werden. Einige Spezifikationen können sich je nach Modelljahr unterscheiden.