Diese Seite wurde mit Google Übersetzer übersetzt
Gerätespezifikationsbibliothek
Grundlegende Modellinformationen
-
Hersteller:Vermeer
-
Modell:FM150
Hersteller anzeigen Modelle anzeigen
Zusätzliche Information
Skid Mounted -
Length: 75" (191 cm)
Width: 48" (122 cm)
Height: 84" (213 cm)
Trailer Mounted -
Length: 170" (194 cm)
Width: 70" (178 cm)
Height: 103 (262 cm)
MODELS
FM150 SG (SKID MOUNTED)/FM150 SGT (TRAILER MOUNTED)
-25 HP (18.6 kw) Kohler Gas Engine
-550 CFM Vacuum Pump Capable of 13 hg inches of mercury
-30' x 3" (9 m x 7.6 cm) light weight smooth bore rubber suction hose (industrial rated)
-(1) 3" (7.6 cm) light weight suction wand - 5' (1.5 m)
-5 Gal (19 L) Fuel Tank
-Empty Weight of unit with out trailer: 1,100 lbs (499 kg)
FM150 SD (SKID MOUNTED)/FM150SDT (TRAILER MOUNTED)
-25 HP (18.6 kw) Kohler Gas Engine
-550 CFM Vacuum Pump Capable of 13 hg inches of mercury
-30' x 3" (9 m x 7.6 cm) light weight smooth bore rubber suction hose (industrial rated)
-(1) 3" (7 cm) light weight suction wand - 5' (1.5 m)
-5 Gal (19 L) Fuel Tank
-Empty Weight of unit with out trailer: 1,150 lbs (522 kg)
GENERAL
-Curbside Remote Controls
-3" (7.6 cm) Portal Shut-off inside of Vacuum Tank
-Suction Hose Storage (rack mounted on side of unit)
-Winterization package with 3 gal (11 L) semiautomatic antifreeze system
-Unitized silencer for Vacuum Pump
-DOT Amber Strobe with 2 halogen work lights
-18" x 18" x 36" (46 cm x 46 x cm x 91 cm) aluminum tool box
-Battery with nation wide warranty
-Six Month limited labor warranty
VALVE EXERCISER
-Capable of reaching Valve 10' (3 m) from either side and rear of trailer (270 degree total movement)
-Capable of hydraulically open and close valves up to 450 ft/lbs torque x 50 rpm
-Hydraulically operate fire hydrants
-Hydraulic pressure gauge to determine ft/lbs of torque required to operate valve
-Extension included to operate valves up to 9' (2.7 m) deep
-Variable Hydraulic Pressure
-Directional Controls at head of exerciser
-Rotation Counter (built in)
-Torque conversion chart up to 450 ft/lbs
FLUSHING UNIT
-Established resistance to determine flow and pressure readings
-Disperse hydrant water into the street to avoid erosion and property damage
-15' (4.6 m) of 5" (12.7 cm) fire hose with quick connect
FILTRATION
-Unitized bag house with wet/dry filtration
-Automatic self-cleaning filter system (empties at same time as the debris tank)
-Filters are washable and removable
-44 Square feet filtration media, combined with 10 gal (37.8 L) water trap
-WET or DRY industrial filters rate at 5:1 air cloth ratio and grain loading of 30-g/acf using 0.5 micron silica dust emissions of .0060 g/acf
TANK
-Full open rear door with remote center pull for easy dump
-150 gal (568 L) 1 cu yard debris tank with stationary tilt
TRAILER
-"DEXTER" torsion axle with rates / at 3,500 pounds
-2" (5 cm) ball hitch
-Empty weight: 500 lbs (227 kg)
-2 - ST205/75R14 tires and 5 lug wheels
-Jack Stand with side crank handle, tint folds
-Electric brakes
WATER SYSTEM
-3,500 psi @ 4 gpm Water System (designed to be utilized with the same engine)
-Electric Clutch with on/off control and low water automatic shut-down
-120 gal (454 L) Water Capacity within the same frame of unit
-50' (15.2 m) of high pressure hose
-Manual Hose Rack mounted to side of water tank
-5' (1.5 m) Roto wand and control handle
-3' (0.9 m) Variable Nozzle Wand for clean up
Diese Information dient nur zu Informationszwecken. HDD Broker LLC kann die Richtigkeit oder Vollständigkeit dieser Informationen nicht garantieren. Diese Informationen können vom Hersteller geändert werden. Einige Spezifikationen können sich je nach Modelljahr unterscheiden.